GORE-TEX® Fabric Repair Kit

The essential field repair kit for all types of repairs including tents, sleeping pads, rainwear, backpacks, boots and more. Kit includes two adhesive backed GORE-TEX® fabric pressure-sensitive patches. Ideal for GORE-TEX and WINDSTOPPER® Fabric. Available in Black, Dark Blue, Tan, Yellow, Navy Digital, Green & Universal Camouflage. Two patches per kit, One 2" x 4" Rectangle, One 3" Round patch.



The patches supplied in this kit will provide a temporary water resistant repair for GORE-TEX® fabric products.

• Patches should be kept in sealed plastic bag until used.

• Area to be repaired must be clean and dry.

• Patch will not adhere effectively to loose debris, grease or oil.

• Patch should overlap tear by at least 1/2" in all directions.

• Remove release paper from back of patch. Lay GORE® product on a smooth flat surface and apply patch using finger pressure (adhesive side down). Rub patch surface in a circular motion from the center out covering the entire patch area.

• Product can be used immediately; however, the adhesive will continue to strengthen over the next 12 to 24 hours.

• The durability of the patch can be enhanced by applying heat and moderate pressure. Use a clean iron and set to medium heat. Press with moderate pressure in a circular motion for 30 seconds.

For permanent repair, W. L. Gore & Associates, Inc. can provide the name and phone number of a certified repair facility. If you have any questions or would like more information, please call 800-431-GORE.