CLICK HERE TO SEE PHOTOS AND PURHCASE EXTRA SLING ADAPTERS FOR YOUR WEAPON

0-15

***To see a larger photo of this adapter, click on the NEWS tab at the left and scroll to the bottom of the page to find the article.

This revolutionary sling adapter will NOT loosen with use. It has a positive locking tab to prevent the adapter from ever detaching from the weapon. As seen in the photo, this adapter has two stages. You can run the webbing through the sling attachment once and then back through the Loop Locks which will positively lock the adapter to the weapon, or route the webbing through the sling attachment slot, then back through one plastic loop then a second time through the sling plate, and to the back side of the adapter to lock it. This shortens the length of the adapter thus raising the weapon higher on your torso for single point sling use or two point sling use. Running the webbing through twice also creates two layers of webbing to help prevent abrasion with the sling receiver plate. Some sling receiver plates with narrow slots will be a little harder to get the locking tab through twice, but it can be done. Simply push the webbing that is already in the slot to the side, then slide the bar tack stitch along the side of the webbing that initially runs through the slot and not on top of it.

Double Locking SPEED LOOP MALE WEBBING ADAPTER The Double Locking Speed Loop Male Webbing Adapter is made of military spec Mil-W-55301 1" webbing, a 1” male ITW Ghillitex side release buckle, and two ITW Ghillitex Loop Locks. The Double Locking Speed Loop Male Webbing Adapter can be used on sling swivels, and slotted sling attachment plates such as on an M4 / AR15.

This adapter does not fit sling loops (circles). For sling loops, select the MASH Hook adapter below 0-02.

UERT-0-01 HK STYLE SNAP ADAPTER The HK Snap Adapter is made of 5625 Mil-Spec 1” tubular nylon, a 1” male National Molding side release buckle, and a matte black powder coated stamped steel HK style sling clip. The HK Snap Adapter also includes an elastic webbing cover to aid in silencing any metal to metal contact. The HK Clip Adapter was designed to connect to any loop attach point. The HK Style Snap Adapter is available in black, od-green, foliage green, and coyote tan.

MASH Hook (Metal All-Purpose Snap Hook) Adapter MADE IN THE USA.

The MASH Hook Adapter is made of 5625 Mil-Spec 1” tubular nylon, a 1” male National Molding side release buckle, and the MASH (Metal All-purpose Snap Hook) gateless snap hook. The MASH offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from a one piece 1” stamped stainless steel plate, and is manufactured in the United States by ITW Nexus/Waterbury Buckle. Pressing on the thumb tabs in the middle separates the two rings, allowing the MASH to be slipped into any loop attach point. It's simple to use and more secure than the HK-style snap. The MASH Adapter also includes an elastic webbing cover to aid in silencing any metal to metal contact. The MASH Hook Adapter is available in black, od-green, foliage green, and coyote tan.

UERT-0-03 UNIVERSAL- P.R.S. (Positive Retention Strap) Adapter The Universal-P.R.S. Adapter is constructed of heavy duty thinner Mil-Spec W-43668 T/3 webbing, a 1” male National Molding side release buckle, and hook & loop Velcro. The P.R.S. can be wrapped around the stock of a weapon such as an SOCOM-2 or 16, AK-47 full stock, SKS, shot gun, SL6, SAGE Gun, or any other piece of equipment or weapon that you need to sling. The hook & loop Velcro retention tab prevents the adapter from falling off of the weapon or piece of equipment when not connected to the sling. The Universal P.R.S. Adapter is available in black, od-green, foliage green, and coyote tan.

This Extended PRS was designed to give owners of the Rock River Arms 458 upper a viable two point sling solution, or a method to secure the front of the weapon to their off hand side utilizing the URBAN-E.R.T. SLINGS Weapons Catch. The Extended PRS can be used on any free float tube or weapon stock with a circumference of 6-1/2".

UNIVERSAL- P.R.W. (Positive Retention Wrap) Adapter The Universal-P.R.W. Adapter is constructed of heavy duty thinner Mil-Spec W-43668 T/3 webbing, a 1” male National Molding side release buckle, and hook & loop Velcro. The P.R.W. can be wrapped around the stock of a weapon such as a Benelli M2 & M4, SOCOM-16, M1A, or 16, AK-47 full stock, SKS, shot gun, SL6, SAGE Gun, or any other piece of equipment or weapon that you need to sling. The hook & loop Velcro retention tab prevents the adapter from falling off of the weapon or piece of equipment when not connected to the sling. The Universal P.R.W. Adapter is lower in profile and holds tighter that the PRS and is available in black, od-green, foliage green, and coyote tan.

Extended UNIVERSAL- P.R.W. (Positive Retention Wrap) Adapter The Extended Universal-P.R.W. Adapter is constructed of heavy duty thinner Mil-Spec W-43668 T/3 webbing, a 1” male National Molding side release buckle, and hook & loop Velcro. The Extended P.R.W. can be wrapped around the stock of a weapon such as a SIG-556 Classic, The front of a SOCOM-16 hand guard, Front of an M1A, or M-16, or any other piece of equipment or weapon that you need to sling. The hook & loop Velcro retention tab prevents the adapter from falling off of the weapon or piece of equipment when not connected to the sling. The Extended Universal P.R.W. Adapter is longer for larger circumferences and lower in profile that holds tighter that the PRS and is available in black, od-green, foliage green, and coyote tan. This version comes with a sling retention tab to retain it's location while installed on the front of the weapon using the existing sling attachment swivel. It relocates the sling attachment to the side of the weapon instead of underneath the weapon.

UERT-0-04 QUICK DISCONNECT- HEAVY DUTY BUTTON ADAPTER The QD Adapter is made out of 5625 Mil-Spec 1” tubular nylon, a 1” male National Molding side release buckle, and a Grov-Tec phosphate coated 1-1/4” quick detach heavy duty button sling attachment. The QD Adapter was designed to attach our sling to weapons that have the commonly available rear single point sling attachments made by Tango-Down (PR-16A4), & GG&G QD Sling Thing for front dovetail side rails. The Quick Disconnect Adapter is available in black, od-green, foliage green, and coyote tan.

The GT™ Mil-Force Swivel is a Patent-pending design constructed from investment cast steel. Refined lines reduce overall weight while increasing strength. Meets or exceeds all military specifications. Industry-leading strength is suitable for the hardest working firearms on Earth. Fits any standard swivel stud. Our GT-MIL-FORCE Swivel Adapter allows our URBAN-SENTRY Hybrid Sling to be used on the standard Swivel Studs that most weapons manufacturers include on their weapons.

0-05 WEBBING-LOOP C.Q.A.(Close Quarter Adapter) The Webbing Loop C.Q.A. is made out of Mil-Spec 1” nylon, a 1” male ITW Ghillitex IR Reducing side release buckle, and a 1” black steel ring. The Webbing Loop C.Q.A. was designed to work with our URBAN-SENTRY Sling in single point mode to connect to a weapon that has a metal sling loop or sling slot. It allows the weapon to hang at a higher position for CQB operations. The Webbing-Loop C.Q.A. is available in black, od-green, foliage green, and coyote tan.

0-06 HK CLIP C.Q.A. (Close Quarter Adapter) The HK Clip C.Q.A. is made out of 5625 Mil-Spec 1” tubular nylon, a 1” male ITW Ghillitex IR Reducing side release buckle, a 1” black steel ring, and a matte black powder coated stamped steel HK style sling clip . The HK Clip C.Q.A. was designed to work with our URBAN-SENTRY Sling in single point mode to connect to a weapon with any loop attach point. It allows the weapon to hang at a higher position for CQB operations. The HK Clip C.Q.A. also includes an elastic webbing cover to aid in silencing any metal to metal contact.

0-07 MASH Hook (Metal All-Purpose Snap Hook) C.Q.A. (Close Quarter Adapter) The MASH Hook C.Q.A. is made out of 5625 Mil-Spec 1” tubular nylon, a 1” male ITW Ghillitex IR Reducing side release buckle, a 1” black steel ring, and a matte black phosphate coated MASH (Metal All-purpose Snap Hook) gateless snap hook. The MASH HOOK C.Q.A. was designed to work with our URBAN-SENTRY Sling in single point mode to connect to a weapon with any loop attach point. It allows the weapon to hang at a higher position for CQB operations. The MASH HOOK C.Q.A. also includes an elastic webbing cover to aid in silencing any metal to metal contact. The MASH offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from a one piece 1” stamped stainless steel plate. Pressing on the thumb tabs in the middle separates the two rings, allowing the MASH to be slipped into any loop attach point. It's simple to use and more secure than the HK-style snap. The MASH Adapter also includes an elastic webbing cover to aid in silencing any metal to metal contact. The MASH Hook C.Q.A. is available in black, od-green, foliage green, and coyote tan.

0-08 QUICK DISCONNECT C.Q.A.- HEAVY DUTY BUTTON The QD C.Q.A. is made out of 5625 Mil-Spec 1” tubular nylon, a 1” male ITW Ghillitex IR Reducing side release buckle, a 1” black steel ring, and a Grov-Tec matte black phosphate coated 1-1/4” quick detach heavy duty button sling attachment. The QD C.Q.A. was designed to attach our sling to weapons that have the commonly available rear single point sling attachments made by Tango-Down (PR-16A4). It allows the weapon to hang at a higher position for CQB operations. The Quick Disconnect C.Q.A. is available in black, od-green, foliage green, and coyote tan.

The GT™ Mil-Force Swivel is a Patent-pending design constructed from investment cast steel. Refined lines reduce overall weight while increasing strength. Meets or exceeds all military specifications. Industry-leading strength is suitable for the hardest working firearms on Earth. Fits any standard swivel stud. Our GT-MIL-FORCE Swivel CQA allows our URBAN-SENTRY Hybrid Sling to be used on the standard Swivel Studs that most weapons manufacturers include on their weapons.

0-28 GT-Mil-Force C.Q.A. is made out of 5625 Mil-Spec 1” tubular nylon, a 1” male ITW Ghillitex IR Reducing side release buckle, a 1” black steel ring, and a Grov-Tec GT-Mil-Force Swivel sling attachment. The GT-Mil-Force C.Q.A. was designed to attach our sling to weapons that have the commonly available rear single point sling swivel studs. It allows the weapon to hang at a higher position for CQB operations. The GT-Mil-Force C.Q.A. is available in black, od-green, foliage green, and coyote tan.

UERT-0-09 P90/PS90 REAR HARNESS ADAPTER The P90/PS90 Harness Adapter is made of heavy duty thinner Mil-Spec W-55301 webbing, 1” male & female ITW Ghillitex side release buckles, hook & loop Velcro, an ITW Ghillitex 1” Loop Lock, and a Ghillitex 1” Tri-Glide. The P90/PS90 Rear Harness Adapter attaches to the rear of the stock utilizing the P90/PS90’s existing rear sling attachment, and the thumbhole to help stabilize the harness to the weapon. The P90/PS90 single point and two point sling attachment point is at a position that aids in keeping the weapon at a better center of gravity, thus keeping the weapon at a higher point on your torso. The P90/PS90 Rear Harness is 100% ambidextrous, and also allows the weapon to hang vertically thus preventing the weapon from hanging at an angle as the weapon’s existing sling attachment point does.

***** IMPORTANT ***** This Adapter is for the P90/PS90 weapon that has an AFTERMARKET 2-1/2" stock extension and is of the same construction as the P90/PS90 basic adapter. If you did not install or have the extension on your PS90, then you need the standard P90/PS90 Harness.

0-10 P90/PS90 P9X-F FRONT HARNESS ADAPTER The P9X-F Adapter is made of heavy duty thinner Mil-Spec W-55301 webbing, a 1” male Ghillitex side release buckle, and a Ghillitex 1” Loop Lock. The P90/PS90 Front Harness wraps around the front optics post where the magazine seats. The webbing is thin enough not to interfere with seating of the magazine, yet durable enough to secure the front of the weapon to our URBAN-SENTRY sling while in two point mode, or to act as a weapons catch while the sling is used in single point mode. The P90/PS90 Front Harness Adapter is 100% ambidextrous.

0-11 F2000/FS2000 REAR HARNESS ADAPTER The FS2000 Rear Harness Adapter is made of heavy duty thinner Mil-Spec W-43668 T/3 webbing or Mil-Spec W-17337, 1” male & female ITW Ghillitex IR Reducing side release buckles, hook & loop Velcro, an ITW Ghillitex IR Reducing 1” Loop Lock, , and an ITW Ghillitex IR Reducing 1” Tri-Glide. The FS000 Rear Harness Adapter attaches to the rear of the stock utilizing the F2000/FS2000’s existing rear sling attachment, and the thumb hole to help stabilize the harness to the weapon. The FS2000 sling attach point is at a position that aids in keeping the weapon at a better center of gravity. The FS2000 Harness is 100% ambidextrous, and also allows the weapon to hang vertically at a higher point than the weapon’s existing sling attach point does. The FS2000 Rear Harness Adapter is available in black, od-green, foliage green, coyote tan. US Army ACU Universal Camo, and Crye Precision's Multicam Pattern.

UERT-0-12 BERETTA Cx4 STORM HARNESS ADAPTER The Cx4 Harness Adapter is made of heavy duty thinner Mil-Spec W-43668 T/3 webbing, 1” male & female National Molding side release buckles, and a 1” Tri-Glide. The Cx4 Harness Adapter utilizes the weapons existing rear sling attachments and thumb hole to stabilize the harness to the rear of the Storm’s stock. The Cx4 Adapter is used to secure the weapon at a higher attach point than the existing sling attachment points using the URBAN-SENTRY sling. The Cx4 Adapter is 100% ambidextrous. The Cx4 Storm Harness Adapter is available in black, od-green, foliage green, and coyote tan.

0-30EAUG STEYR AUG REAR HARNESS ADAPTER The Steyr Aug Adapter is made of heavy duty thinner Mil-Spec W-55301, and a 1” Ghillitex side release buckle to attach to the sling. The Steyr Aug Adapter utilizes a vertical wrap around strap that tightly wraps around the stock just forward of the magazine well, which relocates the rear sling attachment for single point use and better two point use. The male side release buckle then connects to the URBAN-SENTRY sling allowing the weapon to hang at a higher center of gravity than using the weapon’s existing sling attach point. The Steyr Aug Adapter is 100% ambidextrous.

The STG 556 Adapter is made of heavy duty thinner Mil-Spec W-55301 and a webbing, and 1” male Ghillitex side release buckle. The Microtech STG 556 Adapter utilizes a vertical strap that tightly wraps around stock just forward of the magazine well. The male side release buckle then connects to the URBAN-SENTRY sling allowing the weapon to hang at a higher center of gravity than using the weapon’s existing sling attach point in either one or two point carry. The Microtech STG 556 Adapter is 100% ambidextrous.

UERT-0-14 BELT LOOP ADAPTER The Belt Loop Adapter is made of 5625 Mil-Spec 1” tubular nylon, and a 1” female National Molding side release buckle. The Belt Loop Adapter is used as a weapons catch to secure the front of any weapon to your off hand shooting side when using one of the URBAN-SENTRY male sling adapters while in single point mode. The Belt Loop Adapter is available in black, od-green, foliage green, and coyote tan.

The Belt Keeper Catch Adapter is made of 5625 Mil-Spec 1” tubular nylon, and a 1” female National Molding side release buckle and D-ring to be installed on a duty belt with standard belt keepers. The Belt Keeper Catch Adapter is used as a weapons catch to secure the front of any weapon to your off hand shooting side when using one of the URBAN-SENTRY male sling adapters while in single point mode.

UERT-0-16 SPEED LOOP FEMALE ADAPTER The Speed Loop Female Adapter is made of 5625 Mil-Spec 1” tubular nylon, a 1” female National Molding side release buckle, and National Molding 1” Loop Locks. The Weapons Catch Speed Loop Female Adapter was designed to be used just as the Belt Loop Adapter, but is quickly removable from the attach point. It can also be quickly installed on your belt, or gear to secure the front of your weapon via any of the URBAN-SENTRY front sling adapters. The Tactical Operator is also able to install the Speed Loop Female Adapter to the PALS strip on the 2” URBAN-SENTRY sling to secure the front of the weapon back on to the sling while in single point mode. This keeps the weapon up close to your torso and hangs more like a two or three point sling. The operator can quickly deploy the weapon by hitting the side release buckle again making the sling into a one point. The Speed Loop Female Adapter is available in black, od-green, foliage green, and coyote tan.

UERT-0-17 S.I.M. SLING BRIDGE The S.I.M. SLING BRIDGE is made of Mil-Spec 1” MIL-W-55301 webbing, two 1” male Ghillitex side release buckles, one 1” female Ghillitex side release buckle, and a 1” Steel ring. The S.I.M. SLING BRIDGE was designed to join two of our URBAN-E.R.T. S.I.M. slings together. The Tactical Operator can install one S.I.M. sling on each shoulder of their ballistic vest, and then connect the two together via the S.I.M. SLING BRIDGE. This allows the weapon to hang in the center of the chest. The S.I.M. SLING BRIDGE & S.I.M. SLINGS combined with our UNIVERSAL P.R.S. ADAPTER can easily support a Barrett .50 cal., or a ballistic shield, and is practical enough to use with any other smaller weapon system. This system spreads the majority of the weight throughout the ballistic vest instead of just on one side of your body like conventional slings.

This is the MASH Hook by itself. It is Made in the USA. It contains an elastic silencer as well. Please select the color of silencer that you want. This can be used with 1" webbing to replace HK style clips that you may have on other sling brands. Most HK weapons, and SIG-556 weapons use this type of front sling attachment.

This is the HK Clip by itself. It contains an elastic silencer as well. It is a high quality Stamped Steel, not the cheap Zinc Alloy. Please select the color of silencer that you want. This can be used with 1" webbing as a replacement part for older style HK style clips that you may have on other sling brands. Most HK and SIG556 weapons utilize this style of clip for the front sling attachment.

1-1/4" steel Jumbo Button Swivel Stud

1-1/4" GT™ Mil-Force Patent-pending design constructed from investment cast steel. Refined lines reduce overall weight while increasing strength. Meets or exceeds all military specifications. Industry-leading strength is suitable for the hardest working firearms on Earth. Fits any standard swivel stud.

3-Point Sling Side Assembly Kit. $20.00 The 3-Point Side Assembly Kit is constructed of 5625 Mil-Spec 1” tubular nylon, heavy duty thinner Mil-Spec W-43668 T/3 webbing, and ITW Ghillie-Tex low IR hardware. The 3-Point Side Assembly can be utilized along with the URBAN-SENTRY Hybrid Sling's main body to reconfigure your components into a three point sling.

If you have a full stock weapon, you will also need the RSU (Rear Stock Universal) harness part number 0-19. If you have a collapsible stock, you will also need the M4 Strap part number 0-21. If you have a standard hand guard with no front side sling attachment, you will need the FGU (Fore Grip Universal) harness part number 0-20. If you have an existing front sling loop, you will need the HK style metal clip. This kit is available in black, od-green, foliage green, and coyote tan and Coyote with Foliage Hardware. Please with any questions that you may have about your application at 317-223-6509 anytime after 6pm eastern.

The 3-Point Sling RSU (Rear Stock Universal) Harness is constructed of heavy duty thinner Mil-Spec W-43668 T/3 webbing, and ITW Ghillie-Tex low IR hardware. The 3-Point RSU can be utilized along with the URBAN-SENTRY Hybrid Sling's main body and Side Assembly (0-18) to reconfigure your components into a three point sling for full stock weapons.

If you have a standard handguard, you will need the FGU (Fore Grip Universal) harness part number 0-20. If you have an existing front sling loop, you will need the HK style metal clip. This kit is available in black, od-green, foliage green, and coyote tan and Coyote with Foliage Hardware. Please with any questions that you may have about your application at 317-223-6509 anytime after 6pm eastern.

FGU for the 3-Point Sling, Fore Grip Universal Harness 0-20 $5.50

The Fore Grip Universal Harness Adapter is constructed of heavy duty thinner Mil-Spec W-43668 T/3 webbing, and Ghillie-Tex low IR hardware. The FGU connects to most standard fore grips that don't have existing side sling attachment points. It relocates the sling attachment point to the side of the weapon for the 3-Point Side Assembly. The hook & loop Velcro retention tab prevents the adapter from sliding around or rotating on the weapon. The FGU is available in black, od-green, foliage green, and coyote tan.

Sling Retention Tab. 0-32 $1.00 The Sling Retention Tab is constructed of heavy duty thinner Mil-Spec W-43668 T/3 webbing and Velcro. It is designed to be used the with the 3-Point Sling's RSU (0-19), and the FGU (0-20), as well as the PRW (0-30 & 0-30E) to retain the adapter's position on the weapon.

This is the URBAN-SENTRY Hybrid Sling Main Body, Cinch Strap, Ambi-Ring Assembly, and female buckle. This kit does not have any adapters.

The Ambi-Ring Assembly is to be used with the URBAN-SENTRY Hybrid Sling. This part is what allows the sling to be 100% ambidextrous. First place the sling out in front of you with the elastic portion of the sling pointing away,You should be able to see the D-ring. Install the Ambi-Ring with the male buckle facing to the right for a right hand shooter, and to the left for a left hand shooter. Please go to the SLING DEMONSTRATION & INSTALLATION link to the left of the website to view the video.

This is the Cinch Strap replacement part only. This part is used with the URBAN-SENTRY Hybrid sling for one point and two point configurations.

This is the ITW Military Products GhillieTEX IR Reducing Side Release Buckle that is used on all URBAN-ERT Slings. The photo shows the female buckle. Please choose the female or male.

This is a complete replacement accessory kit for the URBAN-SENTRY Hybrid sling. It contains one ambi-ring assembly, one Cinch Strap, and one female side release buckle. This kit does NOT contain the US2 main body, complete sling, or weapon specific adapters.

The Speed Ring Adapter can be installed onto either side of the URBAN-SENTRY Hybrid sling's Speed Tabs. The Female Speed Ring allows the single point sling configuration to be rapidly reconfigured into a two point sling configuration. Simply configure the sling into a two point sling, and install the Speed Ring onto the non elastic shoulder side of the sling instead of the female buckle. Once installed, simply unclip the front adapter which needs to be a MASH Clip from the weapon's front sling attachment, bring the MASH Clip t to your shoulder and clip into the speed ring. The sling can now be utilized as a single point sling for tactical close quarter battle situations.

GP Adapter SPEEDLOOP/HK The General Purpose Speedloop Webbing and HK Clip Adapter is made out of 5625 Mil-Spec 1” tubular nylon, two 1” loop locks, a 1” Delerin ring, and a black powder coated HK Clip Snap hook. This (GP) General Purpose Adapter can be used for any number of methods of attaching a weapon to an existing sling, or body armor as well as to use to secure equipment. You can connect either side of the General Purpose Adapter to the strong side shoulder of body armor and then connect the weapon to the other side. It allows the weapon to hang at a higher position for CQB operations. The HK Clip also includes an elastic webbing cover to aid in silencing any metal to metal contact as well as 18” of 5-50 cord to connect to the weapon, then the HK Clip to the 5-50 cord. The General Purpose Adapter is available in black, od-green, foliage green, coyote, or coyote with foliage hardware.

The General Purpose Speedloop Webbing and MASH Hook Adapter is made out of 5625 Mil-Spec 1” tubular nylon, two 1” loop locks, a 1” Delerin ring, and a black powder coated HK Clip Snap hook. This (GP) General Purpose Adapter can be used for any number of methods of attaching a weapon to an existing sling, or body armor as well as to use to secure equipment . You can connect either side of the General Purpose Adapter to the strong side shoulder of body armor and then connect the weapon to the other side. It allows the weapon to hang at a higher position for CQB operations. The MASH offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from a one piece 1” stamped stainless steel plate. Pressing on the thumb tabs in the middle separates the two rings, allowing the MASH to be slipped into any loop attach point. It's simple to use and more secure than the HK-style snap. The General Purpose Adapter is available in black, od-green, foliage green, coyote, or coyote with foliage hardware.