This specific kit is for the EVO3 A1 (rifle) configuration. Meaning that the EVO3 A1 that you have has the folding stock installed on the back of the receiver possibly classifying it as an NFA registered Short Barrel Rifle or SBR depending on the style of stock that you have. This means that you only have the available sling loops on the side of the weapon in the front and rear to connect the two included MASH Clip Adapters to your "rifle" in this kit.
The EVO3 S1 sling kit is the same sling however it comes with one MASH Clip Adapter for the front side loop, and a Double Locking Speed Loop Webbing Adapter for the rear to connect to the sling slotted bar on the back cap of the S1 pistol configuration without the installed stock. We have had customers that wanted to use the QD Push Button Adapter that plugs into the back of the slotted sling bar socket that state that their QD wants to pop out. This is a bad thing and we do not recommend using the QD Push Button Adapter plugged into the back of the QD socket of the sling bar on the pistol version. This is a CZ BREN defect and not a defect on the part of our QD Push Buttons. Our QD Push Button swivels are an industry standard Mil-Spec Made In USA Push button swivel. The QD socket that CZ Bren mills into the back of this sling bar cap is currently not a Mil-Spec socket which is too loose for the industry standard Mil-Spec QD Push Button Swivels and a QD Push Button Swivel could and most likely will pop out causing the weapon to fall. URBAN-ERT Slings, LLC Does Not recommend or warranty the use of a QD Push Button Swivel from any manufacture including ours to be plugged into the back of the QD socket that CZ Bren provides with your weapon and will not be held liable for the malfunction, damage, injury, or death caused by the defective CZ Bren QD Socket. We only recommend the Speed Loop Webbing Adapter to be used on this sling slotted bar cap for the pistol version.
(The weapons catch adapter attaches to either your belt or the PALS webbing of the sling on your offhand side so that when the Scorpion EVO3 A1 sling is configured as a single point, you can secure the front of the weapon to your offhand side instead of just letting the Scorpion EVO3 A1 hang in front of you for hands free activities or shooting with your sidearm. The URBAN-SENTRY Sling as applied to the Scorpion EVO3 A1 9mm can be used in either a Tactical One Point or Two Point carry mode which allows the operator the ability to mission select the way the sling is configured for any scenario.) This package contains the URBAN SENTRY Scorpion EVO3 A1 sling which is displayed in the photos as both a Two Point and Single Point Sling configuration.
This revolutionary Scorpion EVO3 A1 Sling quickly converts from a TWO point sling to a ONE point sling and is far superior to any other on the market. It allows the operator to choose which configuration will suit them best. The ONE point sling configuration is more beneficial in urban areas during MOUT operations, where as the two point configuration will work best in rural areas, on TCP’s or sentry duty. The conversion can be completed in less than a minute. The URBAN-SENTRY Hybrid Scorpion EVO3 A1 Sling is a totally ambidextrous one point and two point sling. The US2 features a 2" wide main sling body which affords the operator a lot more comfort over longer periods of carry. Unlike the 1" & 1-1/4" slings that tend to cut into your shoulder and neck. The URBAN-SENTRY Scorpion EVO3 A1 slings use 2" wide nylon MIL-W-AA55301 webbing which evenly distributes the weight of the Scorpion EVO3 A1. The URBAN-SENTRY series of slings also utilizes 1" nylon MIL-W-AA55301 webbing. The main sling body is universal to all weapons. What makes it specific to each weapon system are the Adapters that connect to the weapon. The Scorpion EVO3 A1 sling utilizes the Speed Loop Male Webbing Adapter on the rear sling attachment, and the MASH Clip Adapter connected to the front sling loop.
Applied to any weapon with front and rear sling attachments, the URBAN-SENTRY will secure your weapon similar to common 3 point tactical slings, but without the unnecessary excess webbing that runs along the rifle. This modular design allows the sling to be attached to any weapon system using the various URBAN-E.R.T. Adapters. Each standard hybrid sling kit comes with two Adapters of your choice, one for the front, and one for the rear. The weapon will remain tight against you while stowed, however is ready to be deployed in an instant. To engage a target, simply grab the “Cinch Strap-TM" Strap-lock, turn it perpendicular to the webbing like a bow string, and slide it to the rear over the webbing to rapidly release the sling to its pre-configured length. To re-cinch the sling, simply grab the “Cinch Strap-TM” sewn tab, and push it away from you. The ability to secure the Scorpion EVO3 A1 tight against your torso during hand to hand combat is a critical factor when choosing a sling, especially in rural areas. If you are alone, and your backup isn’t close, the URBAN-SENTRY Scorpion EVO3 A1 sling configured as a two point sling is for you. This Scorpion EVO3 A1 sling also benefits snipers, scouts, and hunters, which have to climb obstacles to get into position. In the event that a secondary weapon transition is necessary, the Scorpion EVO3 A1 will fall centrally located, barrel pointing down, ensuring a clear path to your secondary weapon.
***If you want to prolong the life of the rear sling loop that is is made of plastic, it is recommended that you install either a thick key ring, or hand grenade pull ring on the rear sling loop, and then connect the sling's included MASH Clip Adapter to that ring. This issue is just our observation of the fact that CZ decided to make the rear sling loop out of plastic instead of steal as they did on the front sling loop that the MASH Clip connects to. Installing and removing the MASH Clip from the plastic loop as well as normal wear from the MASH Clip wil eat away at the plastic due to the MASH Clip being made of stainless steel.
You can get hand grenade pull rings online or at any gunshow.
This video demonstrates our E-RUSH Sling kit as well as the URBAN-SENTRY Hybrid Sling kit. Not all features of the kit in the video will apply to your order if you aren't purchasing the E-RUSH Sling kit, or the Weapons Catch Adapter.
Incredibly well made. Nice name brand camo. Straps and adjustment are ergonomic. Definitely need some key rings to go through the factory sling mounts. Even on the metal forward attachment point the mash clips bind when making movements and putting the Evo over your back. Ordered some titanium key rings off Amazon to solve this issue. Urban ERT suggest grenade rings which would probably work, but are a little large. Even with this issue I'm pleased with the product and would suggest you grab one if you're on the fence.
I use a two-point sling setup with my CZ Scorpion. I installed the SBR stock and used the two existing sling points on the weapon. Allows your hands to be free to use other tools. Liked the ability to choose different material patterns and the two-inch strap is much more comfortable. I can't compare this to anything else, but it fits the needs I have and allows for a strong and tight shoulder brace for keeping the weapon on target.
Great sling. Comfortable and easy to use. I like it so much I just ordered another one for my other rifle.
Well made would adapt to most any firearm.
2 point or single point.
I bought this sling for my CZ Scorpion. You can adapt it for one point or two point attachment. I like the two point and there is a quick and easy adjustment to go from stowed against your body to deployed. You can also slide it to the 9 o'clock position for comfortable carry. The two inch wide sling is much more comfortable than a one inch. Other slings I've tried are hard to adjust, uncomfortable and seem to have about two miles of excess straps hanging around. If you have a Scorpion, buy this sling.
Excellent,high quality and fast delivery
Great sling for the CZ Scorpion!