CLICK HERE TO BEGIN the written instructions.

Remove the thin webbing from the triglide on the P9X-F Adapter.

Now route the thin webbing through the slot under the optics rail. Be sure that the male side release buckle is on the correct side of the weapon. If you are a right hand shooter, it should be on the left side of the weapon.

3. Once the Adapter is in the correct position, route the thin webbing through the first rung of the triglide as seen in the photo.

Pull the webbing tight, and make sure that the triglide is located at the front left of the weapon's optics post as seen in the photo.

Once the Adapter is tight on the optics post, insert the webbing through the second rung on the triglide, and pull it tight.

This photo shows the proper positioning of the Adapter's triglide.

Now insert the remaining webbing back over on itself, back though the first rung.

Pull the remaining webbing tight. Now ensure that the entire Adapter is tight, and will not interfere with the mechanics of the weapon.

The P9X-F Adapter is now installed.

Completed installation on the weapon for a left hand shooter.